I harvested a doe this past weekend to put meat in the freezer for 2010. It was my first muzzleloader deer. I was able to hit the deer in the vitals (although about 3 or 4 inches lower than ideal) using my CVA Wolf Magnum inline muzzleloader from about 120 yards. I know the muzzleloader advertisers and scope makers publish muzzleloader capabilities up to 200 yards and beyond, but in my mind, this long of a shot was quite a test of muzzleloader accuracy. The CVA Wolf passed the test. I was slowly and carefully walking up a steep hill when I spotted this deer. The shot was taken standing while leaning against a tree. I used 2 powder pellets (100 grain equivalent) with a 245 grain Powerbelt muzzleloader bullet (green in color). Most modern magnum muzzleloaders can take up to 150 grains of powder (3 pellets). I chose to use only 100 grains and it seems to be accurate up to long distances. You don’t get many 100-plus yard opportunities in the dense forests of New England. I was fortunate enough to get a clear opening.
Because of the smoke cloud that lingers after a muzzleloader shot, it can often be difficult to determine if your shot hit target or not when using a muzzleloader. This was the case for me. By the time the smoke cleared, I looked around and saw no sign of the deer. I walked over to the spot where the deer was standing. I saw absolutely no blood. I looked around intently in all directions. No sign of the deer. I decided to remain in the spot in which the deer was standing. I was hunting with a friend, and upon hearing my shot he decided to walk towards me. I was ready to declare a missed shot, when he told me that he found the deer on the ground about 40 yards from where I was standing. I was quite lucky that he happened to find that deer. There was no blood anywhere! Even with a layer of snow on the ground, there was no blood trail. That deer would have been lost if not for my friend running into it. As you can imagine, I was quite pleased that we found the deer.
My friend and my father continued hunting the rest of the day. After cleaning the deer, I dragged it back to the parking area. Since my hunting was done, I decided to sit in the car and listen to the radio until they returned. I took a short nap while sitting in the car. At one point, I opened my eyes to see two deer running right in front of my car! It was a doe being chased by a full grown buck, 6 or 8 points). He had his head down and was pursuing the doe impervious to my presence. It was a scene typically reserved for the peak of the chase phase of the rut, but this was December 11. I’ve read about the “second rut” (a second estrus cycle for does that happened to not be impregnated during the initial rut), but this was the first time I had seen it in action. This buck was definitely in rut mode. Little did I know that I could have stayed at the car, and had a shot at a better deer than anything I saw in the woods!
This deer is presently hanging in my garage. Next weekend I’m going to try butchering the deer myself. This will be the first time I’ve done this on my own. I’ll include an entry next week regarding this task.
Lessons Learned
In every trip into the woods, whether successful at harvesting game or not, I find that I learn something.
1) The distance and accuracy capabilities of modern inline muzzleloaders are not just hype. They indeed are capable of shots in the deer woods approaching rifle capabilities.
2) Not every deer shot in the vital area produces a blood trail. Be careful when you think you missed. Search the entire area because even though you see no blood, you still may have hit the deer.
3) The second rut is not all hype. It certainly does exist. This means that doe scents can be effective into mid-December.
4) When taking a long shot, take time to get yourself a good rest. I made sure I was securely resting my front hand on a tree before taking the shot. I also took the time to adjust my scope. I’m sure I would have missed if I did not take the time to do these two things.
Pimp My CZ 527. The Parts List Part 1
1 month ago
No comments:
Post a Comment